| Subject | Text |
| cpt101 | Q 330 is the muting transistor (KRC103) which goes faulty also change the jumper wire JW307 to a 47 |
| Ok, I took it apart, i'm guessing that the power supply board is the one that the power wire runs in |
|
|
| Not quite sure of the question, but here's the info;
In general, it is prefered to have an ESR me |
| Generally the lower the ESR, the better. However, it is strictly a relative measurement used mainly |
| Hi there Dan, I also have a Bose Lifestyle 48 in which the internal hard drive has died. While chec |
| Combining mixer outputs | I have been running a mixer for live bands & karaoke for years combining the left & right ou |
| Questions on Zenith SJ2773LK | Thanks for the information. BTW, where would the horizontal output transistor & and the power su |
| I did't find a scheme of amp., but I checked parameters of the transistors. You can use IRFZ44 witho |
| Hi G Money..
Are you conected to the correct terminal on the P.C.?? (Preferably "Line Out?")..If |
| ak19 | [b:d7090ddf95][i:d7090ddf95] :D firstl check the 2,2 ohms fusible for oc,(ew circuit),check c630 for |
| [quote:47de80044e="Anonymous"]Your CRT is getting a layer of dead material on the cathodes of each g |
| In general db measurement is used as a logaritmic unit in describing the ratio between in/out signa |